![]() Scalable 2D and 3D Cat Grade is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.Not available indoors or in areas where a GPS signal is not available. Feature is designed to work in unison with other Operator Assist Features. AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads.And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator.This feature is not available indoors or in areas where a GPS signal is not available. Automatically compensates for ground conditions. target load to fully utilize machine capacity benefiting operators of all skills levels. Blade Load Monitor provides real-time feedback of current load vs.Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements.Better visibility can equal less operator fatigue and more confidence in your work.Ĭat small dozers include a suite of Operator Assist, Grade, and Cat Command Features that work seamlessly to save time, effort, fuel, machine wear and overall cost. The sloped hood provides better visibility to the work in front of the blade as well as the overall job site.High Performance Winch Maximum line pull – bare drum Retrieval Winch Maximum Line Speed - Full Drum With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) Length of Basic Dozer (without blade) - Standardĭimensions BLADE: Maximum Angle (either side) - StandardīLADE: Blade Cutting Edge Angle, Adjustable - StandardīLADE: Blade Width at Maximum Angle - Standard Width of Dozer (standard shoes, no blade) - LGP Width of Dozer (standard shoes, no blade) - Standard Length of Basic Dozer (without blade) - LGP The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.īLADE: Blade Cutting Edge Angle, Adjustable - LGPīLADE: Blade Width at Maximum Angle - LGP The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). Service Refill Capacities Final Drives - Each Side Undercarriage Number of Shoes - Each Side - Abrasion Undercarriage Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage Undercarriage Length - Track on Ground - LGP Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.įor machine with ripper, add 554 kg (1,222 lb). Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.Īll non-road U.S.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |